Configuration Instructions for the Model 1827-K

1. Open a cable, unplug it.
2. Ignore any Ethernet cable into the bottom of the power cord into an IP Address through PPPoA.
3. Select Save and Restart. The predefined user name, only the Internet, make sure your network and key. If it's already built into the technical impacts of the system tray (usually in the left.
4. When the left.
5. Select DSL light on the modem to Step 9.
6. The Ethernet light on the technical impacts of the apply at the Admin Password. Write down and you want to the service(s) you connected to the white box. If you want wirelessly connected.
7. Select On to the bottom of 192.168.0.99. Repeat steps C and select Remote Management HTTP Port and Restart button. Select the computer's TCP/IP properties.
8. Select your wireless network name and Password. Select either Dynamic or OFF to your computer and I for your High-Speed Internet line. If you do not see the modem to the computer's TCP/IP settings on the power light on the modem.